点击图片查看原图
您有没有听过“神笔马良的故事”，您有没有想过有一天您也可以信手画出一个可以捧在手上物体？
如果您是一位家长，您想不想为自己的小孩购买一支立体绘图笔，让小孩自己创作出他想要的玩具或者图案来？
如果您是一位骚年，您想不想亲手绘出一个立体的图案，作为礼物，捧在手上送给您的恋人？
如果您是一位学生，您想不想送上一份融入了自己感情的立体物品给您的老师，您的家人？
3D打印笔规格参数
1.出料方式：热熔挤压堆积成型
2.成型方式：三维成型
3.打印范围：无限定
4.吐丝速度：可调
5.打印耗材：ABS材料 （默认配3根3米长ABS耗材）
6.加热温度：160-250度范围内
7.设备工作电压：12V 3A
8.喷嘴直接：0.7、0.4mm
9.产品材质：塑胶外壳
10.净重：0.40kg
11.毛重：0.45kg
12.包装尺寸：长22cm宽17cm高6.3cm
13.整箱规格：1箱30支；外箱尺寸 长45.30*宽33.00cm*高53.00cm
14.整箱规格：1箱20支；外箱尺寸 长45.30*宽33.00cm*高35.80cm.
产品功能图示：
操作说明：
- 把电源适配器AC电源线插入市电插座，另一端DC插头插入绘图笔尾端之“电源输入孔”内。此时黄色LED灯亮，表明设备已通电进入待机伺服状态。
- 点按“送丝按钮”，绝色LED灯亮，表明设备已进入预热状态，大约0.5－2分钟后，当红色LED灯由红转蓝，表明预热结束，设备已可以进行正常作业。
- 把耗材插入笔尾端之“耗材导入孔”，另一手长按“送丝按钮”，随即耗材便由设备内置马达进行输送，待笔尖喷嘴端有胶料吐出即告装载成功。
- 创作。（本设备设有无极调速功能，在创作过程中可根据行笔速度来实时调整出胶量，无需双手操作）。
- 使用过程中严禁触摸喷头及发热部件。
- 当设备超过5分钟不使用，便自动进入睡眠待机状态。此时“工作指示灯”熄灭。如需再次使用，需点按“送丝按钮”进行触发。
- 需要退丝或更换耗材，请重复（2）操作，再长按“退丝按键”即可。
产品装箱清单：
1.1支3D立体打印笔
2.1只12V/3A电源适配器
3.1份3色*3米测试耗材
4.说明书1本（英文版）
产品实拍：
Adjustable Handheld Doodler 3D Printing pen fused deposition modeling
Specification:
Product Show:
1. Put the power adapter AC plug into the outlet DC plug into the "power input" hole, the yellow LED turn on and the pen is started and standby.
2. Press the "wire feeding" button, the red led turn on and the pen is under preheating. After o.5-2minutes later, the red led turn to blue, preheating finished the pen is ready to use.
3. Insert the consumable material into the" wire loading hole "which is at the end of the pen. Another hand keep on pressing the "wire feeding" button, the material will be loaded by built-in motor. Wait there is plastic liquid come out from the nib nozzle, the material loading is succeed.
4. Painting, (The speed controller can adjust the spray amount according the moving speed, no need to use both hands)
5. Do not touching the nozzle and heating parts during the drawing for your fasty.
6. The device will switch to standby model if stop using over 5 minutes. The "working LED "will turn off, when use again, need press the "wire feeding" button to restart.
7. When need to unloading or change the material, please repeat the step 2 and keep on pressing on "wire unloading" button.
"*" Heating time affected by the setting temperature and environmental temperature.
"**" Must cut the material ending to smooth before loading the material.
"***" unloading the material after each use is highly recommended.
The painting pen nib and the near area are dangerous high temperature area, the highest temperature can reach 230°, do not touch the nib with hands or touch others objects with the nib.
Do not block the wire loading hole with foreign body.
Do not use non-official power adaptor from other company.
Do not use non-official consumable material from other company.
This device is precision electronic instrument, no water sprinkling
Keep at safety place after using to prevent from high falling or children touching.
Package:
1x 3D Pen
1x Power Adapter
3x Free Filaments
1x User Manual
Note：
This device is suitable for children over 8 years old and adult use, Children should use it under the tutelage of adult.
The painting pen nib and the near area are dangerous high temperature area, do not touch the nib with hands or touch others objects with the nib.
Do not block the wire loading hole with foreign body.
Do not use non-official power adaptor from other company.
Do not use non-official consumable material from other company.
This device is precision electronic instrument, no water sprinkling.
Keep at safety place after using to prevent from high falling or children touching.